How do I program my URC Universal remote?

Press and hold SETUP for 3 seconds. The LED on the remote will blink twice. Press the VOLUME − key. The LED on the remote will blink 4 times to confirm….

1. Turn the TV on.
2. Press and hold SETUP until the LED blinks twice.
3. Press and hold the OK/Enter key.
4. Let got of the OK/Enter key when the TV turns off. The code is saved.

How do you set up a One For All universal remote?

How does it work? The process is as simple as pointing the original remote towards the One For All remote, selecting a key on the One For All remote and pressing the key on the original. Repeat for each key you want to learn and from then on the One For All will do exactly what your original remote does!

How do I reset my URC remote?

How do i perform a factory reset on my Simple remote?

1. Hold the RED + BLUE keys down until the LED blinks once and then twice.
2. Enter code 981, the LED will blink four times.
3. You can now setup your remote again.

Where is the remote URC number?

Find your product

1. On the inside of the battery door of your One For All remote control.
2. On the back or bottom of your One For All product.
3. On the front of every original One For All manual.
4. On the original One For All packaging.

Where can I find my URC code?

Find your product

• On the inside of the battery door of your One For All remote control.
• On the back or bottom of your One For All product.
• On the front of every original One For All manual.
• On the original One For All packaging.

Why is my one for all remote flashing green?

The LED will blink green twice to indicate the key has been learned correctly.

How many digits is a URC number?

Step 1: Each code consists of 5 digits, which can be entered by using the following keys to represent the digits 1-6 as shown in the Manual. Hold down TV Power and BACK keys until the yellow LED under the ring blinks twice. Hold down STREAMER POWER and HOME – until the red LED under the ring blinks twice.